Ezels.dev

DUALSENSE / REALTIME DIAGNOSTICS

NO DUALSENSE DETECTED

PS4 controller tester: check a DualShock 4 online

[01] LIVE CONTROLLER GEOMETRY
DRAG TO ORBIT
Connect a DualSense Plug in or pair it, then press any button.
DRAG TO ROTATE
VIEW / FRONT
LX
+0.000
LY
+0.000
RX
+0.000
RY
+0.000
UPDATE RATE
— Hz
LIGHT
[06] / PS4 DUALSHOCK 4

Test a PS4 DualShock 4 in your browser

A DualShock 4 is detected as a PlayStation controller, so its buttons, sticks and triggers show up in the tester above. The 3D model is a DualSense, and a few labels differ, as the table below explains.

Updated

How to test a PS4 controller

  1. Connect the controller with a micro-USB data cable, or pair it over Bluetooth by holding the Share and PS buttons until the light bar flashes.
  2. Click anywhere on this page, then press a button. Browsers only show a controller to a page after you use it.
  3. The status in the top right shows the controller as connected, and the inputs light up as you press them.
  4. Press every button, rotate both sticks around their rims and pull both triggers.

How the DualShock 4 maps to the tester

The tester uses the standard button layout that browsers report for game controllers. It relies on your browser reporting that layout, so a controller that comes through as a generic device may label things differently.

DualShock 4 buttons and the label the tester uses
DualShock 4 buttonLabel in the tester
Cross, Circle, Square, Triangle Cross, Circle, Square, Triangle
D-pad Up, Down, Left, Right arrows
L1, R1 L1, R1 (under the trigger meters)
L2, R2 Trigger meters, 0 to 100%
L3, R3 (stick clicks) L3, R3
Share Create
Options Opt
PS button PS
Touchpad click Pad

What differs from the PS5 tester

  • The 3D model is a DualSense. There is no separate DualShock 4 model, so the shapes of the grips and the touchpad differ from your controller.
  • The Mic input never lights, because the DualShock 4 has no mute button.
  • Enable HID is DualSense-only: its device list only offers DualSense and DualSense Edge controllers, so a DualShock 4 shows no gyro, touchpad position or battery readings here.
  • The light bar swatches change the on-screen model only.

For the full set of DualSense features, see the PS5 controller tester.

If your PS4 controller shows up as an Xbox controller

Utilities such as DS4Windows and Steam Input can present a PlayStation controller to the browser as a virtual Xbox controller. When that happens, the tester sees an Xbox controller: the Xbox tab shows as connected and its labels follow the Xbox layout. Close the utility, or turn off its Xbox emulation, then reload the page and press a button again.

What this test can't check

The tester doesn't test vibration, the speaker, the headset jack or the light bar colour of the real controller, because it only reads input. To measure stick wear, use the stick drift test. If the controller isn't detected at all, read the controller not detected guide.

Frequently asked questions

Can I test a PS4 controller online?

Yes. Connect it by USB or Bluetooth, open this page, click on the page and press a button. Buttons, sticks and triggers appear on the PlayStation layout.

Does the tester show the DualShock 4's touchpad?

It detects touchpad clicks, shown as "Pad". Finger positions need WebHID, which this tester only supports for the DualSense, so touch points are not drawn for a DualShock 4.

Why does my PS4 controller look like a PS5 controller?

The tester has one PlayStation model, and it is the DualSense. The controls respond the same way, but the shape on screen is not a DualShock 4.

Does it work with third-party PS4 controllers?

Controllers that report a Sony vendor ID or a name containing PlayStation or DualShock are treated as PlayStation controllers. Others may appear on the tab you have selected, with that layout's labels, if the browser reports them with the standard layout.

Is the DualShock 4 supported by Enable HID?

No. Enable HID only lists DualSense and DualSense Edge controllers.