Ezels.dev

DUALSENSE / REALTIME DIAGNOSTICS

NO DUALSENSE DETECTED

Gamepad tester for PS5 DualSense and Xbox controllers

[01] LIVE CONTROLLER GEOMETRY
DRAG TO ORBIT
Connect a DualSense Plug in or pair it, then press any button.
DRAG TO ROTATE
VIEW / FRONT
LX
+0.000
LY
+0.000
RX
+0.000
RY
+0.000
UPDATE RATE
— Hz
LIGHT
[06] / QUICK GUIDE

Test your controller online

Connect a PS5 DualSense or Xbox controller by USB or Bluetooth, then press a button to start. The live 3D model and input panels show which controls respond. No account or download is required.

Updated

Check buttons and triggers

Press each face button, d-pad direction, bumper and trigger. The input panel counts presses, and the trigger meters show analog travel from 0 to 100%. The button and trigger test explains how to read them.

Check stick drift

Release both sticks and watch the axis values and the stick trace. Readings that move while you aren't touching a stick can point to drift. The stick drift test shows what to look for.

DualSense motion and touch

In desktop Chrome or Edge, enable HID to see gyro and accelerometer readings, touchpad contacts, battery level and the mute button state. See the PS5 controller tester.

How to test a controller online

  1. Connect the controller with a USB data cable, or pair it over Bluetooth.
  2. Open this page, click anywhere on it, then press a button. Browsers only show a controller to a page after you use it.
  3. Check that the status in the top right shows your controller as connected. If it doesn't, follow the controller not detected guide.
  4. Press every button, move both sticks around their full range and pull both triggers. Compare what the 3D model and the panels show with what you did.
The Gamepad Tester showing a 3D DualSense controller, the stick trace, trigger meters and button counters.
The tester with a DualSense selected. Example screenshot with simulated input: Cross held, left stick pushed slightly up and to the right, R2 pulled to 60%.

Choose the test you need

  • PS5 controller tester

    Test a DualSense: buttons, sticks, triggers, plus gyro, touchpad and battery in Chrome or Edge.

  • Xbox controller tester

    Test an Xbox controller's buttons, sticks, bumpers and triggers with a live 3D model.

  • PS4 controller tester

    Check a DualShock 4's buttons, sticks and triggers, and see how they map to the tester.

  • Stick drift test

    Check for stick drift and set a deadzone ring with a live stick trace.

  • Button and trigger test

    Count presses to spot double-registering buttons and watch trigger travel from 0 to 100%.

  • Controller not detected

    Why a browser shows 'no controller detected', and the fixes that usually work.

What this tester can and can't show

The tester reads your controller through the browser's Gamepad API, which current versions of Chrome, Edge, Firefox and Safari support. It can show:

  • Which buttons register, and how many times each was pressed.
  • Stick position as numbers and as a trace, with an adjustable deadzone ring.
  • Analog trigger values from 0 to 100%.
  • How often the controller reports new input, in browsers that provide timestamps.
  • DualSense only, in desktop Chrome or Edge: gyro, accelerometer, touchpad fingers, battery level and mic-mute state.

It does not test vibration, adaptive triggers, speakers or microphones, and it never sends commands to your controller. See browser compatibility for what each browser supports and the privacy page for what the site loads.

Frequently asked questions

How do I test my PS5 or Xbox controller online?

Connect it by USB or Bluetooth, open this page, click on the page and press a button. The status at the top right shows when the controller is detected, and the 3D model and panels respond as you press buttons, move the sticks and pull the triggers.

Which controllers does this gamepad tester support?

It has a dedicated 3D model and layout for the PS5 DualSense, including the DualSense Edge, and for Xbox controllers. A PS4 DualShock 4 is detected as a PlayStation controller and shown on the DualSense layout. Other controllers may appear on whichever layout is selected, but their button labels will not match.

Why isn't my controller detected?

Browsers hide a controller until you press a button while the page is in focus. If it still does not appear, the cause is usually a charge-only USB cable, another app holding the controller, or a Bluetooth pairing problem. The controller not detected guide goes through each one.

Does the tester upload my controller data?

No. Controller input is processed in your browser by the page's own scripts, which make no network requests with it. The site does load Cloudflare Web Analytics and the Ko-fi button; the privacy page lists exactly what.

Can it test vibration?

No. The tester doesn't test vibration or adaptive triggers. Some browsers expose a vibration feature to web pages, but this tester doesn't use it.

Why do gyro and touchpad need Enable HID?

The Gamepad API only reports buttons and sticks. Motion, touchpad and battery data are in the DualSense's raw HID reports, which browsers expose through WebHID. WebHID is available in desktop Chrome, Edge and Opera, and the browser asks your permission first. See browser compatibility.